| Product:
CILINDER |
|
|
CILINDER
CYLINDER AND DEFENDER FOR TOTAL
SECURITY
The
choice of a door based on aesthetic features is
often motivated by personal taste and type of environment
the door is destined for. Other elements must be
considered in the case of a security door, elements
which are fundamental for effective protection.
The quality of materials used, the locking system
and its security, the closing and bolting systems,
thermal and acoustic insulation and precise fittings
all contribute in determining its reliability in
time. |
|
|
| |
...
main features |
| |
LOCKING DEVICE
A European interchangeable cylinder, complete with sturdy
anti-break-in defender. The key is small and cannot be duplicated;
it is easily replaced in case of loss or misplacement. The
system functions with an integration of the locking devices,
allowing the opening of more than one door with just the
one key.
It is equipped with a master key. The service lock, which
has a common spring latch, limits the opening of the door
(optional).
| Cylinder
Mul-t-lock 1+3+1 interactive |
| Cylinder
Evva 3ks 1+4 (total security) |
|
Cylinder Cisa Astral 1+3 |
|
| |
|
| |
4
BOLTS
18mm in diameter, two of which are anti-cut, a special self-adjusting
double inclination spring latch |
| |
|
| |
2
DEADBOLT BOX
controlled by the lock, are two guided rotating anti-cut bolts,
which fix the door to the frame (patented). |
| |
|
| |
2
HINGES
are bronze plated stainless steel, and extremely sturdy with
ball joints with casehardened pin, easily adjustable in three
directions. They can be chromed or varnished (optional). |
| |
|
| |
FRAME
GUARD
Beside the hinges with a particular type of groove, allowing
firm attachment to the frame in closed position. (Patented) |
| |
|
| |
DOOR
HANDLES
Standard door handles are in brass
and are fixed directly on metal. They don’t require
maintenance because they are protected by an epoxy (resin)
dust varnish, as are also the plates of the key opening.
Chrome finishing is optional.
They are positioned at a height in compliance with official
standards set by the Gazzetta Ufficiale 23.06.’89
c.8/1 (from 85 cm. to 95 cm.). |
| |
|
| |
SPY
HOLE
Wide angle at 200°, available in brass finish or chromed
(optional). |
| |
|
| |
SUB-FRAME
Zinc-coated
sheet, can be regulated in three directions (with M10 screws).
(Patented). |
| |
|
 |
LIMITS
THE OPENING OF THE DOOR
(Optional)
|
| |
|
| |
EXTERNAL
PANELLING
Are
in zinc coated sheets, lacquered wood, or varnished variations,
according to the external finishing requested. |
| |
|
| |
INSULATION
Acoustic
insulation 42dB (standard version), thermal insulation in
mineral wood with double seal on both the frame and the security
door. |
| |
|
| |
WINDBREAKER
BLADE
Aligned
with the floor, blocks infiltration of air and thanks to an
auto adjusting oscillating system (optional).
The bottom rabbet is supplied as a standard |
