-
-
Burglar-proofClass 3Info
-
Safety and Protection Class 3
It is the capacity to resist to burglar attempts and it is measured through the stress with static and dynamic loads and the simulation of burglar attempts, carried out with manual and electrical tools such as hammer, chisel, hatchet, shears, electric drill, etc for a maximum test duration of 30 minutes (class 4 quadruples class 3 safety).
-
-
Acoustic insulationRW 39Info
-
Acoustic isolation
It is measured in db Rw and it is the capacity to prevent the passage of noise through the reinforced gate (sound isolation). The more elevated is the value in the display, the better will be the sound-isolating power (this value double each 2,7 dB). The equivalent value expressed in dBA can display higher values from 5 to 10 points.
-
-
Thermal transmittanceUD 1.4Info
-
Thermal transmittance
It is indicated in Ud (U door) = resistance for assembled door and framework is measured in (W / m2K) and it is the capacity to prevent the thermal exchange between two rooms divided by the reinforced gate. The closer is the value in the display to 0, the better will be the capacity to prevent the heat passage. If values are displayed only with “U” they have to be considered as generic and therefore the test certificate has to be checked.
-
-
-
-
Burglar-proofClass 3Info
-
Safety and Protection Class 4
It is the capacity to resist to burglar attempts and it is measured through the stress with static and dynamic loads and the simulation of burglar attempts, carried out with manual and electrical tools such as hammer, chisel, hatchet, shears, electric drill, etc for a maximum test duration of 30 minutes (class 4 quadruples class 3 safety).
-
-
Acoustic insulationRW 43Info
-
Acoustic isolation
It is measured in db Rw and it is the capacity to prevent the passage of noise through the reinforced gate (sound isolation). The more elevated is the value in the display, the better will be the sound-isolating power (this value double each 2,7 dB). The equivalent value expressed in dBA can display higher values from 5 to 10 points.
-
-
Thermal transmittanceUD 1.3Info
-
Thermal transmittance
It is indicated in Ud (U door) = resistance for assembled door and framework is measured in (W / m2K) and it is the capacity to prevent the thermal exchange between two rooms divided by the reinforced gate. The closer is the value in the display to 0, the better will be the capacity to prevent the heat passage. If values are displayed only with “U” they have to be considered as generic and therefore the test certificate has to be checked.
-
-
-
-
Burglar-proofClass 4Info
-
Safety and Protection Class 4
It is the capacity to resist to burglar attempts and it is measured through the stress with static and dynamic loads and the simulation of burglar attempts, carried out with manual and electrical tools such as hammer, chisel, hatchet, shears, electric drill, etc for a maximum test duration of 30 minutes (class 4 quadruples class 3 safety).
-
-
Acoustic insulationRW 44.8Info
-
Acoustic isolation
It is measured in db Rw and it is the capacity to prevent the passage of noise through the reinforced gate (sound isolation). The more elevated is the value in the display, the better will be the sound-isolating power (this value double each 2,7 dB). The equivalent value expressed in dBA can display higher values from 5 to 10 points.
-
-
Thermal transmittanceUD 1.2Info
-
Thermal transmittance
It is indicated in Ud (U door) = resistance for assembled door and framework is measured in (W / m2K) and it is the capacity to prevent the thermal exchange between two rooms divided by the reinforced gate. The closer is the value in the display to 0, the better will be the capacity to prevent the heat passage. If values are displayed only with “U” they have to be considered as generic and therefore the test certificate has to be checked.
-
-
-
-
Burglar-proofClass 4Info
-
Safety and Protection Class 4
It is the capacity to resist to burglar attempts and it is measured through the stress with static and dynamic loads and the simulation of burglar attempts, carried out with manual and electrical tools such as hammer, chisel, hatchet, shears, electric drill, etc for a maximum test duration of 30 minutes (class 4 quadruples class 3 safety).
-
-
Acoustic insulationRW 44.8Info
-
Acoustic isolation
It is measured in db Rw and it is the capacity to prevent the passage of noise through the reinforced gate (sound isolation). The more elevated is the value in the display, the better will be the sound-isolating power (this value double each 2,7 dB). The equivalent value expressed in dBA can display higher values from 5 to 10 points.
-
-
Thermal transmittanceUD 1.7Info
-
Thermal transmittance
It is indicated in Ud (U door) = resistance for assembled door and framework is measured in (W / m2K) and it is the capacity to prevent the thermal exchange between two rooms divided by the reinforced gate. The closer is the value in the display to 0, the better will be the capacity to prevent the heat passage. If values are displayed only with “U” they have to be considered as generic and therefore the test certificate has to be checked.
-
-
-
-
Burglar-proofClass 4Info
-
Safety and Protection Class 4
It is the capacity to resist to burglar attempts and it is measured through the stress with static and dynamic loads and the simulation of burglar attempts, carried out with manual and electrical tools such as hammer, chisel, hatchet, shears, electric drill, etc for a maximum test duration of 30 minutes (class 4 quadruples class 3 safety).
-
-
Acoustic insulationRW 44.8Info
-
Acoustic isolation
It is measured in db Rw and it is the capacity to prevent the passage of noise through the reinforced gate (sound isolation). The more elevated is the value in the display, the better will be the sound-isolating power (this value double each 2,7 dB). The equivalent value expressed in dBA can display higher values from 5 to 10 points.
-
-
Thermal transmittanceUD 1.2Info
-
Thermal transmittance
It is indicated in Ud (U door) = resistance for assembled door and framework is measured in (W / m2K) and it is the capacity to prevent the thermal exchange between two rooms divided by the reinforced gate. The closer is the value in the display to 0, the better will be the capacity to prevent the heat passage. If values are displayed only with “U” they have to be considered as generic and therefore the test certificate has to be checked.
-
-
-
-
Burglar-proofClass 4Info
-
Safety and Protection Class 4
It is the capacity to resist to burglar attempts and it is measured through the stress with static and dynamic loads and the simulation of burglar attempts, carried out with manual and electrical tools such as hammer, chisel, hatchet, shears, electric drill, etc for a maximum test duration of 30 minutes (class 4 quadruples class 3 safety).
-
-
Acoustic insulationRW 44.8Info
-
Acoustic isolation
It is measured in db Rw and it is the capacity to prevent the passage of noise through the reinforced gate (sound isolation). The more elevated is the value in the display, the better will be the sound-isolating power (this value double each 2,7 dB). The equivalent value expressed in dBA can display higher values from 5 to 10 points.
-
-
Thermal transmittanceUD 1.7Info
-
Thermal transmittance
It is indicated in Ud (U door) = resistance for assembled door and framework is measured in (W / m2K) and it is the capacity to prevent the thermal exchange between two rooms divided by the reinforced gate. The closer is the value in the display to 0, the better will be the capacity to prevent the heat passage. If values are displayed only with “U” they have to be considered as generic and therefore the test certificate has to be checked.
-
-
-
-
Burglar-proofClass 3Info
-
Safety and Protection Class 3
It is the capacity to resist to burglar attempts and it is measured through the stress with static and dynamic loads and the simulation of burglar attempts, carried out with manual and electrical tools such as hammer, chisel, hatchet, shears, electric drill, etc for a maximum test duration of 30 minutes (class 4 quadruples class 3 safety).
-
-
Acoustic insulationRW 43Info
-
Acoustic isolation
It is measured in db Rw and it is the capacity to prevent the passage of noise through the reinforced gate (sound isolation). The more elevated is the value in the display, the better will be the sound-isolating power (this value double each 2,7 dB). The equivalent value expressed in dBA can display higher values from 5 to 10 points.
-
-
Thermal transmittanceUD 1.6Info
-
Thermal transmittance
It is indicated in Ud (U door) = resistance for assembled door and framework is measured in (W / m2K) and it is the capacity to prevent the thermal exchange between two rooms divided by the reinforced gate. The closer is the value in the display to 0, the better will be the capacity to prevent the heat passage. If values are displayed only with “U” they have to be considered as generic and therefore the test certificate has to be checked.
-
-
-
-
Burglar-proofClass 3Info
-
Safety and Protection Class 3
It is the capacity to resist to burglar attempts and it is measured through the stress with static and dynamic loads and the simulation of burglar attempts, carried out with manual and electrical tools such as hammer, chisel, hatchet, shears, electric drill, etc for a maximum test duration of 30 minutes (class 4 quadruples class 3 safety).
-
-
Acoustic insulationRW 43Info
-
Acoustic isolation
It is measured in db Rw and it is the capacity to prevent the passage of noise through the reinforced gate (sound isolation). The more elevated is the value in the display, the better will be the sound-isolating power (this value double each 2,7 dB). The equivalent value expressed in dBA can display higher values from 5 to 10 points.
-
-
Thermal transmittanceUD 2.0Info
-
Thermal transmittance
It is indicated in Ud (U door) = resistance for assembled door and framework is measured in (W / m2K) and it is the capacity to prevent the thermal exchange between two rooms divided by the reinforced gate. The closer is the value in the display to 0, the better will be the capacity to prevent the heat passage. If values are displayed only with “U” they have to be considered as generic and therefore the test certificate has to be checked.
-
-